Use One Platform to Unify, Optimise and Control Every Solar & BESS Asset
Cut operational overhead by 80–95%, eliminate negative-price losses and unlock 20–70% higher grid revenue with AI-driven site-level energy flow optimisation.
- Works with any inverter/BESS/PPC
- Automated dynamic scheduling
- Portfolio-wide unified control
Fragmentation Is Killing Your Solar ROI
Your inverters, BESS, PPCs, meters, and market data all run in isolation. This blocks site-level energy optimisation, slows fault detection and produces €10–€40k per MW in untapped revenue.
Partial Site-Level Energy Flow Optimisation
Typical tools lock you into specific manufacturers or aggregators. Each installation has unique grid limits, curtailment rules, consumption curves and market conditions but fragmented systems cannot adapt.
Impact:
No Unified Visibility Across Multi-Site Portfolios
Mixed inverter/BESS/PPC vendors = 4–7 dashboards. No single view. No benchmarking. No fast fault discovery.
Impact:
Manual Monitoring & High O&M Overhead
Operators manually verify alarms, cross-check market prices and log into multiple systems daily.
Impact:
How Fentrica Solves This
Unified Control & Monitoring
Fentrica connects all inverters, BESS units, PPCs, meters, cameras, alarms and grid signals into one real-time control layer. Operators get a single dashboard with fleet-wide visibility, fault status, live power flow and key performance indicators across all sites. This replaces 4–7 vendor portals and removes blind spots caused by siloed ecosystems.
AI-Powered Energy Optimiser
Fentrica optimises each site's full energy flow, not just solar production, by automatically switching modes based on day-ahead prices, weather forecasts, grid limits, curtailment rules, BESS state-of-charge and on-site consumption patterns. This solves the biggest problem in modern solar operations: every site behaves differently and requires unique optimisation logic. The system recalculates optimal behaviour every hour and executes it automatically.
Predictive Maintenance & Smart Alarms
Continuous performance analysis and anomaly detection models flag early signs of component degradation, imbalanced strings, BESS irregularities or PPC misalignment. AI classifies severity, highlights root causes and prioritises high-risk issues so operators know what needs attention first. This turns maintenance into a proactive, data-driven function instead of reactive firefighting.
Smart Maintenance Workflows
Every alarm, anomaly and system action can be made into a work order with full context, logs, device data, priority and recommended next steps. Maintenance teams can assign, track, document and close tasks directly in Fentrica, removing spreadsheets, WhatsApp messages and scattered notes. Vendor teams see only what they need. Asset owners get full history and audit trails. This creates a consistent, standardised maintenance process across all sites regardless of hardware vendor or local team maturity.
Secure EU-Compliant Architecture (No Vendor Cloud Dependency)
The BaseSAFE controller ensures local, secure and independent control of all assets without relying on Chinese cloud platforms. All commands, data flows and control logic run through an EU-compliant, hardened architecture designed for critical infrastructure.
“Fentrica cut our daily workload from hours to under 5 minutes and eliminated all negative-price losses.”
Martin Saar
7 Solar Installations
“Dynamic scheduling paid for itself in weeks. Revenue stabilised and our BESS finally behaves intelligently.”
Industrial Energy Manager
Not a SCADA. Not an EMS. Not a Dashboard.
Most solar/BESS tools solve a single slice of the workflow. Fentrica is a unified hardware + software platform that unifies all your sites, systems and workflows portfolio-wide.
Not just a SCADA
Typical SCADA:
Shows plant data and alarms but no cross-site optimisation, market logic or dynamic scheduling.
Fentrica:
Optimises energy flow, runs BESS strategies automatically, integrates market prices & curtailment and controls multiple sites from one place.
Not just an EMS
Typical EMS:
Manages production data but not full site behaviour (load, BESS, curtailment, grid limits).
Fentrica:
Acts as a site-level energy automation system—charging, discharging, throttling, curtailing, and switching modes based on economics.
Not just a software tool
Typical software tool:
Aggregates data but cannot control hardware, manage workflows or optimise energy flow.
Fentrica:
Direct control of inverters, BESS, PPCs, access control, cameras, alarms + AI-driven optimisation.
Fentrica sits between your assets and the energy market, acting as a real-time control and optimisation layer above existing SCADA and vendor systems.
Fast, Low-Risk Deployment with No Hardware Replacements Required
Connect
Install the BaseSAFE controller as part of a pilot. No upgrades to inverters, BESS, PPCs, or meters.
Sync
Sync all data: inverters, BESS, PPCs, metering, alarms, cameras and grid signals.
Set Up
Our engineers configure BESS logic, scheduling, alarms and dashboards. Your team gets trained in under 1 hour.
Expand
Once the pilot shows results, scale to more sites at your pace.
Telia
We quickly found a technical setup that fit Telia's systems perfectly. We were able to use the equipment we already had, without additional investments into extra inverters or controllers. We highly value.
Everything You Need to Run High-Performing Solar & BESS Operations
Unified Control & Monitoring
All assets in one view.
→ 80–95% less time spent checking systems
AI Energy Optimiser
Dynamic, hour-by-hour scheduling.
→ +20–70% revenue uplift
Predictive Maintenance
Detect failures early.
→ 30–40% fewer issues
Smart Maintenance
Automatic operations & maintenance workflows.
→ 40–60% less workload
Smart Alarms
Unified alarm layer.
→ 60–70% of issues solved remotely
AI Co-Pilot
Explains alarms in plain language.
→ 30–50% faster resolution
Negative Price Protection
Stops losses automatically.
→ €0 negative-price leakage
Market & Grid Automation
Balancing & flexibility signals handled automatically.
→ Revenue without operator input
See How Fentrica Transforms Solar & BESS Operations
Energy Flow Control
Operators manually switch between export, charging and curtailment modes across multiple systems. They check prices, weather and BESS state while trying to align inverter behaviour with grid limits. Optimisation is reactive and depends heavily on operator availability.
Fentrica automatically manages site-level energy flow hour by hour. Charging, discharging, curtailment and export are optimised using prices, weather, grid limits and BESS state. Operators oversee results instead of managing modes.
Fault Detection & Diagnostics
Faults are scattered across vendor portals with limited context. Operators discover issues late and spend time interpreting error codes. Severity and root cause are often unclear.
Fentrica unifies alarms into one intelligent layer with context and history. Predictive detection flags anomalies early and AI explains what happened and what to do. Most issues are resolved remotely.
Maintenance Workload
Maintenance is triggered reactively via emails, calls or vendor alerts. Tasks and documentation are manual and inconsistent. Historical maintenance data is fragmented.
Fentrica auto-creates tasks from alarms with full technical context. Work is prioritised, tracked and logged in one system. Maintenance becomes predictable and standardised.
Portfolio Oversight
Each site is managed individually with no clear portfolio view. Identifying underperforming sites requires manual checks. Oversight becomes harder as portfolios scale.
Fentrica provides a unified portfolio view with benchmarks and alerts. Operators instantly see which sites need attention and why. Daily oversight scales to minutes.
Frequently Asked Questions
Yes, most inverter, BESS and PPC brands are supported.
Usually no. In rare cases a small module is required.
Most sites go live in 1–4 weeks.
Yes, BaseSAFE is local, secure and EU-compliant. No reliance on foreign clouds.
Modular SaaS: €75–€200/month for small sites; €1k–€5k/month for multi-MW portfolios.
Ready to Unlock Higher Revenue with Lower O&M Load?
Fentrica gives you unified control, automated optimisation and fewer site visits across every site you operate.